• Aluminum veneer baking technology; national standard aluminum veneer coating material and standard thickness.

    2020/11/29 宏铝建材 2981

    The baking paint of aluminum veneer curtain wall ceiling products is not only an important key to the decorative effect, but also directly affects the service life of the products. Previously, we have introduced the types of aluminum decorative materials baking paint, as well as the reasonable construction site and life. Today, I continue to talk about the baking process of aluminum plate and several national standard paint thickness.

  • Aluminum panel curtain wall corner bending technology; 90 degree right angle, R fillet, 135 degree oblique angle commonly used bending technology.

    2020/11/29 宏铝建材 8122

    Bending (folding) is one of the most basic processes of aluminum veneer. Even if it is a common flat plate, it also needs a 20-25mm folding edge, which is convenient for installation and hanging hole (corner code) construction. Secondly, it also enhances the strength of the plate surface. The most commonly used is 90 degree right angle bending, of course, according to the design drawings for acute angle, right angle, obtuse angle and other customized arbitrary angle bending, in order to adapt to a variety of modeling and decoration places.

  • Aluminum curtain wall panel construction & why should aluminum veneer leave gaps? How wide is the anti-seismic joint?

    2020/11/29 宏铝建材 7253

    The novelty, safety, environmental protection and durability of curtain wall materials will become the basic characteristics. As we all know, aluminum alloy has excellent rigidity, light weight and strong plasticity, which is convenient for aluminum veneer curtain wall manufacturers to process and customize various shapes. However, careful friends will find that there are generally 10-20 mm wide anti-seismic adhesive joint when aluminum curtain wall panel is constructed. What is the reason?

  • How many kinds of hollow and carved aluminum veneer? CNC turret laser water carving which carving process is better?

    2020/11/29 宏铝建材 1283

    Hollow carving decoration technology has existed since ancient times, especially in the retro architectural decoration materials, we often see wooden art plaques, carved inscriptions plaque, has a strong national characteristics, and now with the arrival of the industrial age, hollow carving technology changes quickly, the pattern is also changing. Of course, it also needs the exquisite and exquisite process equipment of the manufacturer, as well as the professional design scheme, and reasonable collocation of fancy patterns, so as to integrate various pattern elements into the architectural decorative plates, and bring fashionable and personalized art space for various decoration occasions. The hollowed out and carved aluminum veneer can extend the visual sense of space of the plane board, which has the effect of light transmission and penetrating the scenery

  • What are the advantages and disadvantages of slotted bending aluminum veneer?

    2020/11/29 宏铝建材 1882

    Slotting, also known as gouging, is one of the commonly used technological processes in sheet metal processing. The V-shaped cutter is used to dig out a groove at the bending corner of sheet metal parts by slotting machine, so that the bending radius is smaller and the sheet metal parts reach the true 90 ° right angle. Increase the beauty of materials. Whether the ceiling of aluminum veneer curtain wall should be slotted and bent depends on whether the installation nodes are closely assembled, and the close assembling is also divided into conventional close splicing and pure close splicing. If the aluminum veneer is not slotted and bent, even if it is closely assembled, there will be two R rounded corners at the seam position of the folded edge, so the slotting technology emerges as the times require. Slotted aluminum veneer generally needs a thickness of more than 2.5mm

  • Is anodized aluminum veneer the same as electroplated aluminum sheet?

    2020/11/29 宏铝建材 1132

    As we all know, there are many kinds of aluminum veneer baking process. The commonly used aluminum veneer is outdoor powder baking paint, polyester baking paint, PVDF fluorocarbon baking paint and other main processes. The main features are economic benefits, convenient paint color matching, outdoor installation weather resistance of about 10-15 years, basically meeting the service life of decoration and replacement. However, the surface coating of aluminum veneer installed in some public places needs higher Mohs hardness, so enamel baking process or anodic oxidation treatment is adopted. However, enamel coating has been introduced in detail before. This question focuses on the process difference between anodized aluminum plate and electroplated aluminum plate. Anodic oxidation

  • Hole arrangement of punching aluminum veneer, customized pattern punching curtain wall!

    2020/11/29 宏铝建材 621

    Common hole type: punching aluminum veneer has better decorative effect, which is convenient for ventilation and reducing the positive and negative wind pressure coefficient of curtain wall system. After installation, it is combined with LED color lamp light source to present various decorative artistic conception through various changeable hole patterns. Punching aluminum veneer is also known as metal perforated aluminum plate. We use high-quality metal materials, commonly used hole types such as round hole and square hole Hole, elliptical hole, diamond hole, five pointed star hole, long waist hole, etc., can also be customized according to customer requirements, such as trademark logo graphics. The processing method is generally through CNC machine tools for stamping, or die punching, according to the holes in CAD drawings

  • Ancient copper aluminum veneer, common bronze surface treatment coating what?

    2020/11/29 宏铝建材 598

    We know that in the building materials market, all kinds of commonly used decorative materials are dominated by \"aluminum alloy, stainless steel, plastic, wood, ceramics, glass, paint, stone\". And people for red orange yellow green blue purple and other surface coating color has long been aesthetic fatigue, so many engineering decoration sites are using retro copper, copper, red copper, wood grain color, metal wire drawing and other decorative styles. As we all know, copper is a kind of expensive metal material. If the wall is decorated with copper plate, it will increase a lot of cost budget. Therefore, the ancient copper color aluminum veneer, as well as the ancient copper surface treatment process also came into being. aluminum

为您推荐

电话咨询
邮件咨询
在线地图
QQ客服