1. Arc aluminum veneer can be made of 1100 series or 3003 series aluminum alloy plates. The thickness of the outer wall arc-shaped aluminum veneer is generally 2.5 mm and 3 mm, the thickness of the lower layer and skirt can be 2.0 mm, and the thinnest 1.0 mm or 1.5 mm can be selected for the inner wall and ceiling.
2. 根据弧形铝单板的使用场所不同，采用不同的表面涂层。室外材料一般选用氟碳涂料，室内材料可选用聚酯涂料和粉末涂料。 与传统装饰材料相比，使用弧形铝单板装饰具有以下优点：
Curved aluminum veneer has the characteristics of light weight, high strength and good rigidity. Sound absorption and sound insulation materials such as sound-absorbing cotton and rock wool can be added.
The surface coating of arc-shaped aluminum veneer has good weather resistance and ultraviolet resistance due to the selection of fluorocarbon coating. The color and gloss are durable and corrosion resistance is good. Under the condition of - 50 ℃ - 80 ℃, it can be bad at - 50 ℃ - 80 ℃. Under the condition. Fluorocarbon coating is the best outdoor coating.
Arc aluminum veneer has excellent processing performance, which is convenient for cutting, welding, bending and installation. This is incomparable with other decorative materials.
The color of arc aluminum veneer can be widely selected and matched arbitrarily. It is easy to clean, maintain and meet the requirements of environmental protection.