The company produces multi-functional aluminum alloy decorative board, which can be used for modeling ceiling, retaining wall, partition, background wall and other indoor and outdoor decoration. It can completely replace the traditional decorative materials such as wood board, mineral wool board and gypsum board in furniture decoration, so as to achieve the decoration without painting, saving labor and money and labor.
It can be processed into various artistic forms according to the effect drawings of decoration engineering. The color of the paint on the board is rich, and the paint layer lasts for a long time without discoloration, falling off and powdering. You can also use the technology of vacuum heat transfer printing and water transfer printing to transfer various wood textures onto the board, forming a fashionable and beautiful decorative building materials. In conclusion, aluminum alloy wall panel has the following ten advantages:
The first advantage is thermal insulation function;
In engineering decoration, the above functional requirements are very common, but traditional materials are difficult to meet at one time. Aluminum veneer curtain wall, through punching, adding sound-absorbing mineral wool, can meet the design requirements of sound insulation and thermal insulation.
According to the test of the national authority, the temperature difference of our products is 7 degrees in the ordinary installation room. However, it is hot in summer in the South and cold in winter in the north. This building material is one of the best decoration materials.
With excellent heat insulation function, this product can be used for a long time in balcony, sunshine room, villa top floor, stove, etc. It belongs to energy saving and environmental protection decorative materials advocated by the state.
Second, the sound insulation effect is good
According to the detection of relevant national departments, the sound insulation of products is as high as 29-32 dB, equivalent to the sound insulation effect of solid brick walls. It can be used in bedrooms, study and other rest places to solve the problem of noise pollution, and the installation in the toilet can solve the problem of loud water noise in sewers.
In infrastructure projects, noise barriers are often used in residential areas of airports and high-speed rail lines, which effectively solves the noise pollution caused by traffic noise to residents.
Advantages 3. Fire protection function:
With the continuous improvement of the government's awareness of fire safety in public places and relevant laws and regulations, construction contractors often have a headache in grading the combustion performance of building materials. It is difficult for general materials to meet the different characteristics of safety, environmental protection, beauty and durability. Aluminum veneer curtain wall is made of metal, which is one of the natural fire prevention building materials. According to the fire department, the fire protection grade of aluminum veneer is as high as A2 and the melting point is as high as 660 degrees, which is one of the excellent fire-proof building materials. For aluminum veneer and various aluminum decorative building materials, many projects can enter the construction site directly without the authorization letter of combustion performance grade identification.
Advantages 4. Moisture proof, rust proof and corrosion resistance
This product has a perfect moisture-proof engineering, has the effect of wood, but there is no wood board susceptible to moisture, heat expansion and cold shrinkage easy to crack and other issues, in the southern region of plum rain season and air humidity, process pollution is relatively large, the material is easy to be affected by moisture, rust, mildew, etc., it is most suitable for the installation of aluminum curtain wall ceiling, so that the material can be used for a long time after construction without any worries.
It has the advantages of high strength and no deformation
This material uses high-quality high-strength antirust alloy aluminum plate as the base material, which is processed by cutting, punching, carving, bending and welding. In addition, in order to ensure that the plate surface will not be deformed, stiffeners will be installed in the back plate every 500-600mm width. After the sheet metal is formed, it is also subject to the chrome setting treatment.
It can be used in all kinds of wall decoration, partition wall decoration and other places.
The construction is convenient and fast
The frame design is adopted in the design of this material, which not only increases the strength of the plate surface, but also facilitates the installation of corner codes (hanging ears) at the bending frame for construction and fixation. It can be directly installed on the blank wall or ceramic tile, and can also be used for the renovation of old buildings. It can save time, effort and labor.
Advantages 7. Environmental protection, recyclable;
Today's society has higher and higher requirements for green environmental protection and safety, so many places have eliminated traditional building decoration materials, especially many owners are allergic to paint, formaldehyde and other chemical gases, and the materials can not be recycled. The aluminum veneer is a kind of metal building materials, which is one of the basic characteristics of environmental protection and recycling. Moreover, there is no health hazard to the owners caused by the above harmful gases. To achieve zero formaldehyde, zero radiation, no smell, that is to install live, greatly advance the check-in or business hours.
Advantages 8. The board is colorful and bright
Color cards are an important bridge between customers and aluminum veneer manufacturers. Some designs use Pantone color cards, some use ral color cards, and others use other kinds of international color cards. Generally speaking, as long as the international color card number, as well as gloss, we can color.
Therefore, the color of the ceiling of the aluminum curtain wall is extremely rich. In addition to color baking paint, the aluminum plate surface can also be used for texture transfer printing of wood grain, stone grain, blue and white porcelain, and 3D pattern printing. Make the color of product board dazzling.
Advantage 9: light material, good rigidity,
Aluminum plate is lighter than glass, stone and other traditional curtain wall, aluminum veneer square weight; 1.5 thickness 4.5kg 2.0 thickness 6kg 2.5 thickness 7.5kg 3.0 thickness 9kg.
Light material also means convenient construction. It has lower requirements for the keel steel frame of the wall and the load-bearing load of the curtain wall. There are no bulky ceramic tiles, stones, glass and other defects. It is very suitable for the renovation of old buildings.
Advantages 10. Simple maintenance and easy cleaning
The natural color of the product has good self-cleaning, not easy to dirty, can be directly washed with cloth and water, there is no problem that the product is not easy to clean and maintain. There is no chemical reaction to all kinds of detergents, so it can be directly cleaned with detergent, washing powder, toilet detergent, etc., and even strong alkali and Tianna water can be diluted and directly used for wall cleaning without discoloration, bubble and falling off. It is recommended to avoid the use of unknown chemicals. Reduce unnecessary trouble.